1998 Tayana

TA-YANG YACHT BUILDING CO., LTD. 

ROBERT H. PERRY 

GENERAL CONSTRUCTION 

Hand laminated fiberglass hull with P.V.C. foam construction with mat and woven rovings, Isopthalic resins. Isopthalic gelcoat on all exterior fiberglass surfaces. 

A matrix of longitudinal and transverse foam cored stringers in the lower hull providing maximum hull stiffness. 

Internal iron ballast glassed into a modified fin keel with choice of drafts. Skeg mounted rudder, with internal stainless steel rudder post and integral stainless steel reinforcement. 

The deck is a composite construction using end grain light wood coring. All deck hardware areas are reinforced using encapsulated marine grade plywood. Deck hardware is through bolted using stainless steel backing plates. 

ENGINE AND STEERING 

• Repowered with BETA MARINE DIESEL 

• Flexible engine mounts. 

• Racor fuel filter. 

• Engine alarm systems. 

• Lead foam insulated engine room. 

• Raw water strainer for engine intake. 

• Antisyphon valve. 

• Muffler/waterlock system. 

• Shaft strut with cutlass bearing. 

• 1-1/2" stainless steel prop shaft with three-blade bronze propeller. 

• Stuffing box. 

• Two black steel fuel tanks, capacity 120 gal.? 

• Stainless steel steering pedestal with dual lever controls. 

• Stainless steel "destroyer" type steering wheel. 

Emergency steering system with tiller. 

• Rudder bearing. 

• Bronze rudder shoe skeg mounted rudder. 

SPARS AND RIGGING 

• Custom Forespar mast. 

• Four halyards; main, genoa, staysail and spinnaker, led internally. 

• Internally led topping lift and outhaul. 

• Tapered airfoil section aluminum spreaders. 

• Anchor light and masthead tricolor. 

• Combination deck and steaming light. 

• Masthead mounted windex. 

316 stainless steel standing rigging with Swage fittings. 

ELECTRICAL 

Customized Newmar electrical panels. 

D/C panel sections include volt and amp gauges, 20 circuit breakers. 

Full gauges for AC and DC panels110 volt shore power system, with master breaker and eight circuit breakers. 

110 volt outlets throughout. 

110 volt GFI outlets in both heads. 

Two 12-volt marine H.D. 120 AH batteries. 

Heavy duty battery selector switch. 

40 amp-3 bank battery charger 

• Internal bonding system to all chainplates, thru hulls, engine and rudder system. 

• Zincs as required.te 

• Numerous overhead cabin lights designed to interior lighting plan. 

Engine room light. 

• Chart table light. 

Running lights to international rule. 

SAILS AND CANVAS 

• UK or equivalent Mainsail with 2 Reef Points and cover. 

• UK or equivalent Yankee with bag. 

• UK or equivalent Staysail with bag. 

DECK FITTINGS 

• Non-skid side decks and cabin house top. 

• Solid teak caprail. 

• Six custom stainless steel mooring fairleads. 

• Six yachtsman type stainless steel mooring cleats. 

• Stainless steel double bow and stern pulpits. Including, The 

• Stainless steel stanchions with custom bases. 

• Stainless steel boarding gates port and starboard. 

• Double life lines. 

• Stainless steel cockpit drains. 

• Custom mast collar. 

• Two cowl vents for the master stateroom. 

• Two flush mounted deck ventilators and 1 motor fan over galley. 

Two stainless steel deck mounted pad eyes. 

• Six Bomar or equivalent, aluminum overhead hatches. 

• Stainless Steel opening ports with safety glass. 

• Two custom stainless steel fixed windows. 

Aluminum genoa and staysail tracks with cars. 

INTERIOR 

Standard two staterooms, two head layout. 

• All bulkheads of marine grade plywood with compression fillets against hull sides. 

• Teak veneer and solid teak trim on all interior bulkheads and cabinetry. 

• Solid teak beveled cabin doors with louvers. 

• Solid teak louvered doors on all lockers. 

• Custom teak navigation station with custom seating. 

• Teak dinette table. 

• Teak ceilings on exposed hull sides. 

• Teak handrails, port and starboard. 

• Removable formica overhead with teak battens. 

• Solid teak and holly cabin sole. 

• Numerous removable floor boards with associated hardware. 

• Formica counter tops in galley and heads with stainless steel sinks. 

• Hand rubbed satin varnish on all interior teak surfaces. 

• 4" deluxe cushions covered in choice fabric. 

GALLEY 

• Poured foam insulated refrigerator and freezer compartments. 

• Three burner stainless steel propane stove with oven. 

• Stainless steel lined stove area. 

• Two propane tanks. 

• Custom deep double stainless steel sinks. 

• Formica counter tops. 

• Trash bin. (optional) 

• Numerous drawers, lockers and dry storage bins. 

MISCELLANEOUS 

Complete Coast Guard Equipment Package including; PFD's, horseshoe buoy, flare kit, fire extinguisher, horn. 

• Mooring Package: anchor chain and rode, docklines and fenders. 

• Ritchie SP-5 Compass with cover 

COMMISSIONING 

Standard Yacht Price is a sail away package. Your boat is completely commissioned with all specified equipment installed, launched and ready to sail in Annapolis, Maryland. 

Tayana Yachts is constantly striving to improve it's products, thus specifications are subject to change without notice. 

• Traveler system with control lines and hardware. 

• Deck organizers. 

• Sheet stoppers. 

• All required blocks for sheets and halyards. 

• Teak cockpit sole and bridge deck. 

• Fiberglass molded propane storage compartment for two tanks. 

• Two molded coaming compartments. 

• Teak companionway doors. 

• Companionway drop boards. 

• Reverse transom and optional swim platform. 

WINCHES 

• All winches are Lewmar Self Tailing: 

2-Two-Speed #50 CST Genoa (primary) winches. 1-Two-Speed #40 CST Main sheet winch. 2- Two Speed #40 CST Secondary winch. 1- Two-Speed #40 CST Halyard winch. 2-Two-Speed #40 CST Halyard winch. 2-10" Locking Winch Handles. 

PLUMBING 

• Stainless steel water tanks with baffles, total capacity 230 gal. 

• Ten gallon hot water heater (110 volt and engine driven). 

• Hot and cold pressure water system. 

• Self priming fresh water pump. 

• Accumulator tank. 

• Faucets in galley and heads. 

• Large stainless steel double sink in galley. 

• Two large heads with showers. 

• Automatic sump pump for showers. 

• Large stainless steel sink in each head. 

• Manual toilet in each head. 

• Holding tank and piping for waste disposal in each head. 

• Bronze ball cocks/thru hull fittings bonded to ships system. 

• Electric 12 volt bilge pump with automatic float switch. 

• Manual bilge pump. 

ANCHORING 

• Custom stainless steel double bow roller/stem head fittings. 

•45 lb plow anchor with chain and rode. 

• Lewnmar 2000 or equivalent electric windlass with dual controls. 

Listing MLS by Yachtr.com